MAFCO Piling Light Weight Sheeting

INTERMEDIATE-LIGHTWEIGHT ASTM-A-328 or A-572 Grades Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²	Sec. Mod. in³ (Ft. Wall)
SZ-10	.164	17.2	9.4	7.3
SZ-11	.179	18.8	10.3	7.9
SZ-12	.209	21.9	12.0	9.2
SZ-14	.239	24.6	13.5	10.4
SZ-15	.250	25.6	14.0	10.9
Shoreline Section	Moment of Inertia in⁴ (Per Pile)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
SZ-10	16.6	27.4	4.75
SZ-11	18.2	29.8	4.75
SZ-12	21.2	34.8	4.75
SZ-14	24.4	39.9	4.75
SZ-15	25.5	41.7	4.75

Top Δ

INTERMEDIATE-HEAVY ASTM-A-328 or A-572 Grades Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²	Sec. Mod. in³ (Ft. Wall)
SZ-14.5	.250	32.4	14.5	13.0
SZ-14.5RU	.270	35.1	15.7	14.0
SZ-18	.312	40.4	18.1	16.2
SZ-20	.340	44.1	19.8	17.5
SZ-21	.350	45.3	20.3	18.1
SZ-22	.375	48.6	21.8	19.3
Shoreline Section	Moment of Inertia in⁴ (Per Pile)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
SZ-14.5	136.9	61.49	5.75
SZ-14.5RU	147.8	66.4	5.75
SZ-18	171.0	76.83	5.75
SZ-20	185.6	83.37	5.75
SZ-21	191.4	86.0	5.75
SZ-22	204.6	91.92	5.75

Top Δ

ZEE LIGHTWEIGHT ASTM-A-328 or A-572 Grades Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²	Sec. Mod. in³ (Ft. Wall)
LZ-8	.164	17.2	8.3	3.6
LZ-7	.179	18.8	9.1	3.9
LZ-5	.209	21.9	10.6	4.6
LZ-3	.239	24.6	11.9	5.2
LZ-250	.250	25.6	12.3	5.4
Shoreline Section	Moment of Inertia in⁴ (Per Pile)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
LZ-8	16.6	8.1	4.75
LZ-7	18.2	8.9	4.75
LZ-5	21.2	10.4	4.75
LZ-3	24.4	11.8	4.75
LZ-250	25.5	12.4	4.75
Bent Corners - Any Angle up to 90° Inside and Outside Corners (Bent on simple or complicated lock leg) are also available

LIGHTWEIGHT ASTM-A-857, GR.33 & 36 (Bare or Galvanized) Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²
10-10 Ga.	.134	10.8	7.2
8-8 Ga.	.164	13.2	8.8
7-7 Ga.	.179	14.4	9.6
6-6 Ga.	.194	15.8	10.5
5-5 Ga.	.209	16.9	11.3
Shoreline Section	Sec. Mod. in³ (Ft. Wall)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
10-10 Ga.	2.2	3.5	3.70
8-8 Ga.	2.62	4.2	3.70
7-7 Ga.	2.8	4.4	3.70
6-6 Ga.	3.0	4.9	3.70
5-5 Ga.	3.4	5.4	3.70
Bent Corners - Any Angle up to 90° Available from stock: Capping Angle, Waling Channel, Tie Back Rods Also Available: Fabricated Corners & Tees / Custom Capping, Waling & Tie Backs

Top Δ

MID-HEAVY ASTM-A-328 or A-572 Grades Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²	Sec. Mod. in³ (Ft. Wall)
SZ-250	.250	32.4	15.9	16.6
SZ-313	.312	40.4	19.9	20.6
SZ-340	.340	44.1	21.5	22.4
SZ-350	.350	45.3	22.1	22.9
SZ-375	.375	48.6	23.6	24.5
Shoreline Section	Moment of Inertia in⁴ (Per Pile)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
SZ-250	182.2	89.42	5.75
SZ-313	227.3	111.53	5.75
SZ-340	247.5	121.45	5.75
SZ-350	254.0	124.62	5.75
SZ-375	272.2	133.55	5.75

Top Δ

HEAVY ASTM-A-328 or A-572 Grades Fully Melted & Manufactured in the U.S.A.

Shoreline Section	Thickness (Nominal)	Weight lb/lf Pile	Weight l b/ft²	Sec. Mod. in³ (Ft. Wall)
SZ-222	.312	40.4	22.1	26.7
SZ-23	.340	44.1	24.1	29.0
SZ-24	.350	45.3	24.8	29.7
SZ-27	.375	48.6	26.6	32.0
Shoreline Section	Moment of Inertia in⁴ (Per Pile)	Moment of Inertia in⁴ (Ft. Wall)	Coating Area ft²/lf
SZ-222	299.0	163.09	5.75
SZ-23	325.5	177.52	5.75
SZ-24	334.1	181.91	5.75
SZ-27	358.0	195.18	5.75

MAFCO
Mid-America Foundation Supply, Inc.

PH: 888-893-7453
Fax: 260-424-8635

3101 New Haven Ave.
Fort Wayne, IN 46803

••••••••••••••

Poseidon Barge Corp.

••••••••••••••

Enviro Media Blasting

Low Dust Abrasive
Blasting Technology

••••••••••••••

Hercules Machinery Corp.

Manufacturer and Supplier of Foundation Equipment.